[support] No module ipv6 in mip kernel

["Liu Ming (刘铭)"]

Hi

Thank you for your support. But I am face new problems.

First, I don't know why, but the started mip6d program by LSB 
(/etc/init.d/mip6d) must be restarted to have the anycast address. I 
found this step is missing.

Second, I found I can't send BA message, the error is loged in log file:

Thu Mar 27 16:44:25 mh_send: sending MH type 6
from 3ffe:501:ffff:103:0:0:0:1
to 3ffe:501:ffff:103:0:0:0:1234
Thu Mar 27 16:44:25 mh_send: remote CoA 3ffe:501:ffff:102:21d:fff:fe0a:9e14
Thu Mar 27 16:44:25 mh_send: sendmsg: No such process

Notice the end line, it should not occur in normal process.

Martin André 写道:
> Hi
>
> Liu Ming (刘铭) wrote:
>> Hi,
>>
>> I try to use ifconfig to setting ipv6 address, but it seems doesn't 
>> work,
>>
>> I input
>>
>> sudo ifconfig eth3 inet6 add 3ffe:501:ffff:103::1/64
>>
>> The ipv6 address is added, you can see it in ifconfig, but you can't 
>> link it by ping6 3ffe:501:ffff:103::1 in localhost
>
> This is probably because your interface doesn't have a link local 
> address configured. Try to plug a cable in the interface (no need to 
> connect to a real network, a hub is sufficient).
>
>> then I want to config the anycast address. I don't know exactly how 
>> to do it. The only way which didn't raise a error is
>>
>> sudo ip addr add 3ffe:501:ffff:103::1/64 anycast 
>> 3ffe:501:ffff:103:fdff:ffff:ffff:fffe dev eth3
>>
>> But no anycast address can be shown in ifconfig
>>
>> I don't know another way
>
> mip6d does that for you.
>
> Hope this helps.
> _______________________________________________
> Support mailing list
> Support at ml.nautilus6.org
> http://ml.nautilus6.org/mailman/listinfo/support
>
>