[support] mipv6 error

[Sebastien Decugis]

Hi,

This time, I can see an IKE exchange in the log of the MN (but, oddly,
not on the HA... Maybe the packets are received through another
interface?) as follow:


> 17:12:19.052674 IP6 (hlim 64, next-header: UDP (17), length: 324)
> 3ffe::3:215:ff:fe4d:7046.isakmp > 3ffe:0:0:2::1.isakmp: isakmp 2.0
> msgid cookie ->: phase 1 I #34[]: [|#33]
> 17:12:19.076956 IP6 (hlim 63, next-header: UDP (17), length: 256)
> 3ffe:0:0:2::1.isakmp > 3ffe::3:215:ff:fe4d:7046.isakmp: isakmp 2.0
> msgid cookie ->: phase 1 R #34[]: [|#33]
> 17:12:19.105155 IP6 (hlim 64, next-header: UDP (17), length: 564)
> 3ffe::3:215:ff:fe4d:7046.isakmp > 3ffe:0:0:2::1.isakmp: isakmp 2.0
> msgid cookie ->: phase 2/others I #35[]: [|#46]
> 17:12:19.133803 IP6 (hlim 63, next-header: UDP (17), length: 100)
> 3ffe:0:0:2::1.isakmp > 3ffe::3:215:ff:fe4d:7046.isakmp: isakmp 2.0
> msgid cookie ->: phase 2/others R #35[]: [|#46]

Can you send the new log of iked from your MN and HA? These logs should
show the exchange that is captured, and the reason why the SA is not
created...

I don't think quagga is needed, unless you have a complex testbed with
dynamic routing required...

Best regards,
Sebastien.