[support] Not getting BACK from HA
Eriza Hafid Fazli
eriza.fazli at triagnosys.com
Wed May 20 04:53:18 JST 2009
Hi,
the configs look fine to me. Also my experience is that I can start MR and
HA independently, so theres no order to follow.
One thing I read from the howto page is that theres still an issue in UMIP
MCoA when mixing home and foreign interface (
<http://www.nautilus6.org/doc/nepl-howto/nepl-howto.html#6a>
http://www.nautilus6.org/doc/nepl-howto/nepl-howto.html#6a). I dont know if
its still the case now since Im just a normal user :-) So dear Developers,
please enlighten us :-)
Rgds,
Eriza
_____
Von: Abu Zafar Shahriar [mailto:shahriarou at yahoo.com]
Gesendet: Dienstag, 19. Mai 2009 19:36
An: Eriza Hafid Fazli
Cc: support at ml.nautilus6.org
Betreff: Re: [support] Not getting BACK from HA
Hi Eriza,
First of all thanks for your prompt reply. I would like to give u some more
information about our setup.
*We connect egress of HA, AR1, AR2 to the Internet (CS network of our
university).
*We directly boot the MR in foreign network1.
*We use wlan0 in MR for both home and foreign network1by changing SSID, and
wlan1 only for foreign network2 (currently out of range).
*Home and foreign network1 provides coverage for the same geographical area.
Can u please answer me the following:
*Is there any order that we should follow to boot and run startup scripts in
HA and MR?
Configuration files are attached.
Thanks again.
--Shahriar
--- On Tue, 5/19/09, Eriza Hafid Fazli <eriza.fazli at triagnosys.com> wrote:
From: Eriza Hafid Fazli <eriza.fazli at triagnosys.com>
Subject: Re: [support] Not getting BACK from HA
To: "Abu Zafar Shahriar" <shahriarou at yahoo.com>
Cc: support at ml.nautilus6.org
Date: Tuesday, May 19, 2009, 11:01 AM
Hi Shahriar,
could you please send the MR and HA configs?
Rgds,
Eriza
Abu Zafar Shahriar wrote:
> Hi all,
>
> We setup the testbed for NEMO MCoA in Ubuntu kernel ver. 2.6.23. We were
just testing the testbed when the mobile network is connected to one foreign
network, and found that HA does not send any BACK. Also, found that packets
sent from LFN reaches CN; but packets sent from CN reaches HA that does not
encapsualte and forward the packet to MR.
>
> In home network it is working fine.
>
> Can anyone please shed some light on what we did wrong?
>
> Thanks.
>
> --Shahriar
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Support mailing list
> Support at ml.nautilus6.org
> http://ml.nautilus6.org/mailman/listinfo/support
>
--
----------------------------------------------------------------------------
---------------------
Eriza Hafid Fazli
TriaGnoSys GmbH
Argelsrieder Feld 22
82234 Wessling-Oberpfaffenhofen
Germany
Tel: +49 8153 88678-209
Fax:+49 8153 88678-1
email: eriza.fazli at triagnosys.com
www: http://www.triagnosys.com
------------------------------------
TriaGnoSys GmbH, Registergericht: München HRB 141647, Vat. :DE 813396184
Geschäftsführer: Matthias Holzbock, Dr. Axel Jahn, Dr. Markus Werner
This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you are not the addressee or authorized to receive this for the
addressee, you must not use, copy, disclose or take any action based on
this message or any information herein. If you have received this message
in error, please advise the sender immediately by replying to this e-mail
and delete the material from any computer. Thank you for your cooperation.
----------------------------------------------------------------------------
---------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://ml.nautilus6.org/pipermail/support/attachments/20090519/30d55bf9/attachment.htm
More information about the Support
mailing list