[support] NEPL not starting? Can't access virtual terminal.

[dfg dfg]

Hi everyone,

 

This is my first post to the mailing list, so please bear with me if I make a mistake :)

 

I am currently setting up a test bench with 1 HA, 1 foreign network and 1 mobile node. 

 

I was able to install Ubuntu 9.10 and then recompile the kernel to enable the modules as required in the NEPL HOW-TO. I was also able to compile umip-0.4 patched with NEPL, MCoA and HAHA support. I also created a start up script file as per the NEPL documentation.

 

So far, I have configured the home agent. When starting the home agent, this is what I get:

 

mip6d[2468]: MIPL Mobile IPv6 for Linux v2.0.2-umip-0.4 started (Home Agent)
Sat Jan 16 19:28:44 main: MIPL Mobile IPv6 for Linux started in debug mode, not detaching from terminal
Sat Jan 16 19:28:44 conf_show: config_file = /etc/mip6d/mip6d.conf
Sat Jan 16 19:28:44 conf_show: vt_hostname = localhost
Sat Jan 16 19:28:44 conf_show: vt_service = 7777
Sat Jan 16 19:28:44 conf_show: mip6_entity = 2
Sat Jan 16 19:28:44 conf_show: debug_level = 10
Sat Jan 16 19:28:44 conf_show: debug_log_file = stderr
Sat Jan 16 19:28:44 conf_show: PolicyModulePath = [internal]
Sat Jan 16 19:28:44 conf_show: DefaultBindingAclPolicy = 129
Sat Jan 16 19:28:44 conf_show: NonVolatileBindingCache = disabled
Sat Jan 16 19:28:44 conf_show: KeyMngMobCapability = disabled
Sat Jan 16 19:28:44 conf_show: UseMnHaIPsec = disabled
Sat Jan 16 19:28:44 conf_show: MnMaxHaBindingLife = 262140
Sat Jan 16 19:28:44 conf_show: MnMaxCnBindingLife = 420
Sat Jan 16 19:28:44 conf_show: MnRouterProbes = 0
Sat Jan 16 19:28:44 conf_show: MnRouterProbeTimeout = 0.000000
Sat Jan 16 19:28:44 conf_show: InitialBindackTimeoutFirstReg = 1.500000
Sat Jan 16 19:28:44 conf_show: InitialBindackTimeoutReReg = 1.000000
Sat Jan 16 19:28:44 conf_show: UseCnBuAck = disabled
Sat Jan 16 19:28:44 conf_show: DoRouteOptimizationMN = enabled
Sat Jan 16 19:28:44 conf_show: MnUseAllInterfaces = disabled
Sat Jan 16 19:28:44 conf_show: MnDiscardHaParamProb = disabled
Sat Jan 16 19:28:44 conf_show: SendMobPfxSols = enabled
Sat Jan 16 19:28:44 conf_show: OptimisticHandoff = disabled
Sat Jan 16 19:28:44 conf_show: MobRtrUseExplicitMode = enabled
Sat Jan 16 19:28:44 conf_show: SendMobPfxAdvs = enabled
Sat Jan 16 19:28:44 conf_show: SendUnsolMobPfxAdvs = enabled
Sat Jan 16 19:28:44 conf_show: MaxMobPfxAdvInterval = 86400
Sat Jan 16 19:28:44 conf_show: MinMobPfxAdvInterval = 600
Sat Jan 16 19:28:44 conf_show: HaMaxBindingLife = 262140
Sat Jan 16 19:28:44 conf_show: HaAcceptMobRtr = enabled
Sat Jan 16 19:28:44 conf_show: HaAcceptMCoAReg = enabled
Sat Jan 16 19:28:44 conf_show: DoRouteOptimizationCN = enabled
RELIABLE: Hard Switch 0
RELIABLE: Group 0
RELIABLE: Prio  0
RELIABLE: Addr  0:0:0:0:0:0:0:0
RELIABLE: Prfx len 0
Sat Jan 16 19:28:44 xfrm_cn_init: Adding policies and states for CN
Sat Jan 16 19:28:44 xfrm_ha_init: Adding policies and states for HA
Sat Jan 16 19:28:44 ha_if_addr_setup: Joined anycast group 2001:a:b:0:fdff:ffff:ffff:fffe on iface 6
RELIABLE STATE: STABILIZING
relha_main.c, get_above_prio, line:296
mip6d[2468]: relha_main.c, get_above_prio, line:296


Does this mean that the home agent has been started properly? Why is it that I can't access the virtual terminal using: telnet localhost 7777? I also tried chaning the vt_service port to 1234, but that did not make a difference. My umip was also compiled with --enable-vt.

 

Any help appreciated.

 

Cheers :)
 		 	   		  
_________________________________________________________________

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://ml.nautilus6.org/pipermail/support/attachments/20100116/17c6a81f/attachment.htm